Latest innovative design tool and advanced techniques of manufacturing now enable Printed Circuit Board (PCB) manufacturers to lower their cost of production unlike before. On many occasions, productions costs tend to increase due to errors made in the PCB design phase. Much worse, having to redo the whole work is also tasking and costly to manufacturers. PCB designers need to avoid fabrication errors while designing printed circuit boards. By doing so, they will be releasing printed circuit boards to meet industry standards. We at OurPCB would like to present you with a list of five costly PCB design mistakes to watch out. Read on for a clear understanding, as highlighted.
1、Incompetent/Poor Layout Techniques
PCB designers must be able to come up with excellent layout designs for the proper functionality of components that use printed circuit boards. Lately, there is a huge demand for PCBs with minimal footprints. Printed circuit board designers are therefore required to employ the use of smaller components that reduce footprint significantly. Generally, components that find use here are very close to each other.
If you happen to select an incompetent layout technique, then the connection may go wrong and affect the functionality of where it is going to find use. Sadly, a majority of printed circuit board manufacturers out there find it hard coming up with the best layout. The greatest challenge faced is when handling the device with higher pin counts and a smaller pitch. If the layout is wrong or incompetent, rest assured that the board will fail to function as desired.
So, to ensure the desired functionality, it is very important to select the best layout technique available in the market. If you are in the market for the best PCB designer, look no further than OurPCB. We understand nearly everything to do with the board layout and ready to assist you all the way. Regardless of whether they are simple or complex layout designs, we have the right personnel with the best techniques to assist you. We understand how poor PCB layout affects the productivity and credibility of a PCB designer. Choose us today for the best PCB layouts.
Image 1: An image a faulty PCB as a result of a poor design
2、Wrong/Incorrect Designing Tools
If anything, having in place the right tools or equipment is a fundamental step needed for a successful printed circuit board design. With the use of the right tools, rest assured of a board that functions well in the intended place. Choosing the wrong equipment will bring about problems such as increased costs of manufacture and delayed time in creating the design of the board. If you look around, there are high chances that there are plenty of printed circuit boards in the market designed using incorrect designing tools.
Again, a majority of printed circuit board manufacturers seem to struggle with this problem a lot. Many of them find it a bit challenging in their choice of tools to use. It is always recommended to use the right tools that suit all your design needs. Opting for substandard printed circuit board design tools will lead to a board that won’t meet its intended needs. However, all is not lost since there are several easy-to-use tools such as electronic design automation software packages.
We at OurPCB always ensure that we employ several design tools to come up with a board whose functionality is unquestionable. Our designers employ a number of these tools depending on where the circuit board will find its use. Again, if you happen to be in the market for a manufacturer with a huge list of PCB design tools, look no further than OurPCB. It is very important to carry out a proper analysis and homework and choose the right equipment that suits all your needs.
Image 2: An image of a technician using equipment to operate on a PCB
3、Landing Pattern Errors
Landing pattern errors are equally another huge challenge that a majority of printed circuit board designers currently in the market find it challenging. Landing pattern errors are lately coming in as another challenge during the boards’ design face affecting many designers out there. Printed circuit board landing patters is made up of a huge library of electric mechanisms that are known to use schematic symbols.
There is little or no challenge all to printed circuit board designers who follow the design through and thoroughly. However, in case the libraries are not followed as desired, then drawing the schematic symbol by hand is another way. But of importance to note here is that it is very easy to make mistakes when one is drawing the landing pattern manually. Such mistakes may also end up increasing the chances of errors.
With pride though, we at OurPCB don’t find or constantly report issues to do with landing pattern errors that much. We employ several electronic components and software packages in our printed circuit boards to ensure functionality. It is very easy to make costly errors when drawing your landing pattern. For example, in case you get the pin-pin spacing wrong even by a millimeter, it will be a bit hard or tasking to solder on the circuit board.
Image 3: An image of a proper landing pattern
4、Decoupling Incorrectly Located Capacitors
Critical components of the board require a clean and very stable source of voltage. But for decoupling capacitors to function as desired, they must be close to the pin that requires the stable voltage. Sadly, a majority of PCB designers struggle with this, leading to components that don't work in the right way.
Also critical is to ensure the placing of the output capacitor meant for power supply as close as possible to the regulators' output pin. By doing so, the optimization of stability gets optimized in addition to an improvement in transient response. Still, if you get it wrong, rest assured that your board will fail in terms of functionality.
Printed circuit board designers have to ensure that they utilize the decoupling capacitors in the right way. We at OurPCB have industry-tested experts with the ability to decouple capacitors with a lot of ease. If the placement of capacitors is incorrect, they will not work properly and affect the device where it is going to be in use.
5、Failure to Backup the Work
For you to achieve the perfect results during the design process, you can do so using some software and data. A good example is the electronic design automation software that assists a lot of designers to come up with complex printed circuit board designs. Based on high speeds and flexibility of the software, it is very easy to lose the data even before saving them.
To ensure that such important data is not lost, it is essential to ensure that you save your data as often as possible. If necessary, printed circuit board designers need to ensure that they come up with save points. By creating such savepoints, even if a single storage point gets spoilt, the others will remain saved and secured. With a backup in place, there are no reasons to worry in case one or two complex designs are lost.
We at OurPCB understand the importance of backing up our printed circuit board designs regardless of whether they are simple or complex. Our entire designs are safely backed up and no chance of the data getting lost. With us, rest assured that your board is in safe hands designed by experienced personnel with years in the industry.
As it appears, printed circuit board design needs excellent technological skills and ardent precision. Mistakes made in the printed circuit board layout can amount to significant losses. Therefore, it is essential to ensure that the design is double-checked to prevent low-quality products from finding their way to the market. If you don't take into account the points above, you will end up with an ineffective product that won't fetch good prices. Recently, many people are cautious about quality products, and printed circuit boards are no exception. Are you planning to manufacture your printed circuit board? Well if that is the case, it is essential to approach an experienced industry expert first.
OurPCB is one of the reputed printed circuit board manufacturers that offer a wide range of printed circuit board solutions. For decades, our clients have always relied on us for the best printed circuit board solutions. Choose our printed circuit boards that are excellently designed by industry-tested personnel. There are plenty of printed circuit board mistakes to avoid during the design stage. However, those mentioned above are some of the most common ones worth noting.